Quick Connect 2 Head with Turncock
- Vertical or horizontal version
- For filling (recirculation) of chemicals – special versions available (e.g., with ball valve).
- Available in PE, PVDF, CD, and PFA.
Brief description
The heads with turncock valve for the Quick Connect 2 System provide an easily detachable, secure, and contamination-free connection between mobile chemical containers and the stationary chemical supply. The head is provided with a coding disc that must match the coding of the Quick Connect dip tube to enable a connection. The primary application of the heads with valve is for higher flow rates (compared to the heads of this series with check springs) and for media with high vapor pressure (e.g., ammonia), to avoid cavitation of the pump due to reduced pressure loss. The valve unit is designed for the modular Quick Connect Heads Version 3.X system, which allows for retroactive changes to all connections.
Product features in key points
- Head made from high-purity polyethylene, PVDF, or electrically conductive PE.
- Sealing element (shaft) made from PTFE.
- Seals made from FFKM (“Kalrez®”), FKM (“Viton®”), or EPDM (depending on application and chemicals). Shaft sealing with FEP-coated seals.
- Also suitable for gaseous and conductive chemicals
- With flare connections for medium and ventilation as standard
- Freely configurable product due to wide design spectrum (connection sizes, connection types, angled outlets, etc .
- Manufactured and tested under clean room conditions
- Wide range of accessories available
Specification
| DH | Dispense Head |
|---|---|
| X | Function A = Turncock |
| X | Gasket System K = Kalrez® M = FFKM F = FKM E = EPDM |
| XX | Material (PE, PVDF, CD) |
| XXX | Chemical Code (Refer to table Chemical Coding) |
| X | H: Horizontal V: Vertical |
| FX/X | Connection for Fluid: F3/8 = 3/8” Flare F1/2 = 1/2” Flare F3/4 = 3/4” Flare F1 = 1” Flare |
| X | H: Horizontal V: Vertical |
| FX/X | Connection for Ventilation: F1/4 = 1/4” Flare F3/8 = 3/8” Flare F1/2 = 1/2” Flare |
Further products
Highest quality from the co-developer of the proven Quick Connect system
-
Show productSmartDock Base – five ports
Base with five ports to host inserts
-
Show productSmartDock Base – two ports
Base with two ports to host the inserts
-
Show productQuick Connect 2 Filling Heads
The filling/recirculation heads for the Quick Connect 2 System provide an easily detachable, secure, and ...
-
Show product
-
Show productQuick Connect 2 Dip Tubes – S62x5 CD TurnLock.
Dip Tube with adapter S62x5R, injection-molded, optionally made of high-purity polyethylene or polypropylene.
-
Show productQuick Connect 2 Dispense Head HighFlow
The Quick Connect extraction heads for the Quick Connect 2 HighFlow System provide an easily detachable, ...
Request
"*" indicates required fields
